Sense:]event:port n:nedge:enable
Page 57

HP E1459A SCPI Command Reference

[SENSe:]EVENt:PORT

n:NEDGe:ENABle

Sets the Negative Edge Detection Mask for Port n.

Parameters

Comments

•

Each bit enables the corresponding channel negative edge detect for Port n. A 1

means the mask is enabled for that bit, a 0 means the mask is disabled for that
bit.

•

*RST Condition: clears the mask (no enabled bits).

Example

EVEN:PORT 1:NEDG:ENAB 32767

Enables Negative Edge Event Detection
on all bits of Port 1

[SENSe:]EVENt:PORT

n:NEDGe:ENABle?

Returns the decimal value of the Negative Edge Detection Mask as a 16 bit integer.

Parameters

Comments

•

Returns a number in the range of -32768 to +32767.

•

Each bit enables the corresponding channel negative edge detect mask for Port

n. A 1 means the mask is enabled for that bit, a 0 means the mask is disabled
for that bit.

•

*RST Condition: clears the mask (no masked bits).

Parameter Name

Parameter Type

Range of Values

Default

PORT

numeric

0, 1, 2, 3 (PORT = PORT0)

-32768 to +32767 (0000

to FFFF

)

PORT0