HP E1459A - Manual (Page 65)

64 HP E1459A SCPI Command Reference
STATus:OPERation:PSUMmary:ENABle < mask>
Sets the value of the OPERation Status Port Summary Enable Register.
Parameters
Comments •
This mask determines which Operation Status Port Summary Events are
summed and reported in bit 9 of the Operation Status Register. Bits 0 through 3
reflect Data Available on Ports 0 through 3 respectively; bits 4 through 7
reflect edge events on Ports 0 through 3 respectively. See Figure 3-1.
•
*RST and *CLS do not affect the value of the enable mask.
•
STATus:PRESet sets the value of the enable mask to 0.
Example STAT:OPER:PSUM:ENAB 0xFFFF Enables all bits of the Operation Status
Port Summary Enable Register
STATus:OPERation:PSUMmary:ENABle?
Returns the value of the Operation Status Port Summary Enable Register as a signed
16 bit integer.
Parameters None
Parameter Name Parameter Type Range of Values Default
< mask> numeric -32768 to 32767 (0000 h to FFFF h ) 0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com