Installing the hp e1459a in a vxibus mainframe – HP E1459A User Manual

Page 25

Installing and Configuring the HP E1459A

Installing the HP

E1459A in a

VXIbus Mainframe

The HP E1459A may be installed in any C-size VXIbus mainframe slot
(except slot 0). Refer to Figure 1-8 to install the module in a mainframe.

Figure 1-8. Installing the HP E1459A in a VXIbus Mainframe

WARNING

To prevent electric shock, tighten faceplate screws when
installing module into mainframe.

Set the extraction levers out.

Slide the

into any slot

(except slot 0) until the backplane
connectors touch.

Seat the

into the

mainframe by pushing in the
extraction levers

Extraction

Levers

Tighten the top and bottom screws to
secure the module to the mainframe.

To remove the

from the mainframe,

reverse the procedure.

NOTE: The extraction levers will not
seat the backplane connectors on older
VXIbus mainframes. You must manually
seat the connectors by pushing in the
module until the module's front panel is
flush with the front of the mainframe.
The extraction levers may be used to
guide or remove the

module

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com