Hot-plug power supply calculations, Ddr2 sdram dimm specifications, Mb diskette drive specifications – HP DL365 User Manual
Page 78
Specifications 78
Specification Value
Rated steady-state power
700 W
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Co
DDR2 SDRAM DIMM specifications
CAUTION:
Be sure to install DIMMs in the proper configuration. Refer to the Documentation
CD.
Item Description
Size*
512-MB, 1-GB, 2-GB, 4-GB
Width 64
bits
*Use only 512-MB, 1-GB, 2-GB, or 4-GB, 72-bit wide, 1.8-V, PC2-5300 Unbuffered ECC DDR2 DIMMs. Use HP
DDR2 DIMMs only.
1.44-MB diskette drive specifications
Specification Value
Dimensions
Height
12.7 mm (0.5 in)
Width
96 mm (3.8 in)
Depth
130 mm (5.1 in)
LEDs (front panel)
Green = On
Read/write capacity per
diskette
High density
1.44 MB
Low density
720 KB
Drives supported
1
Drive height
One-third height
Drive rotation
300 rpm
Transfer rate
High 500
Kb/s
Low 250
Kb/s
Bytes/sector 512
Sectors per track (high/low)
18/9
Tracks per side (high/low)
80/80
Access times