HP DL365 - Manual (Page 37)

Removal and replacement procedures 37
10. Disconnect the power and data cables from the SAS backplane.
11. Remove the three T-15 Torx screws from the backplane.
12. Remove the backplane.
To replace the component, reverse the removal procedure.
Systems Insight Display
The Systems Insight Display is an assembly that includes the front panel LEDs, Power On/Standby button,
and a cable.
To remove the component:
1. Power down the server (on page 25 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 25 , " Remove
the server from the rack " on page 26 ).
3. Remove the access panel (" Access panel " on page 30 ).