HP DL365 - Manual (Page 32)

Removal and replacement procedures 32
To remove the component:
1. Power down the server (on page 25 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 25 , " Remove
the server from the rack " on page 26 ).
3. Remove the access panel (" Access panel " on page 30 ).
4. Remove the air baffle (" Air baffle " on page 31 ).
5. Remove the fan module.
To replace the component, reverse the removal procedure.
IMPORTANT: After installing the fan module, firmly press the top of the module connectors to
ensure the connectors are seated properly.
Battery tray
To remove the component:
1. Power down the server (on page 25 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 25 , " Remove
the server from the rack " on page 26 ).
3. Remove the access panel (" Access panel " on page 30 ).
4. Remove the air baffle (" Air baffle " on page 31 ).
5. Remove fan module 2 (" Fan module " on page 31 ).
6. Remove the battery tray.