HP DL365 - Manual (Page 43)

Removal and replacement procedures 43
6. Remove the DIMM.
To replace the component, reverse the removal procedure.
Heatsink
To remove the component:
1. Power down the server (on page 25 ).
2. Extend the server from the rack (on page 25 ).
3. Remove the access panel (" Access panel " on page 30 ).
4. Remove the air baffle (" Air baffle " on page 31 ).
5. Open the heatsink retaining latches.
6. Remove the heatsink.
To replace the heatsink: