HP QMS 1660 - Manual (Page 46)

Emulations
QMS 1660 Print System Reference 4-14
Emulations
Use the Administration/Emulations menu to set the parameters for
the available printer emulations. Optional printing emulations appear
only if installed.
» Note: To choose an emulation or ESP for a particular interface, use
the appropriate interface menu in the Administration/Communications
menu. See “Interfaces,” later in this chapter, for more information.
Setting ESP Default Parameters
ESP (Emulation Sensing Processor) technology analyzes incoming
file data and selects the appropriate printer emulation from those
installed on the printer. The ESP Default Emul option allows you to
set the emulation used when ESP is unable to identify the language
of a print job. For more information on ESP, see chapter 5, “Additional
Technical Information.”
Setting HP-GL Parameters
Enhanced Mode
Increases the resolution of a downloaded character.
Menu Administration/Emulations/ESP Default Emul
Choices HPGL, Lineprinter, PCL5, PostScript
Default PCL5
Notes You must turn the printer off and back on again for the change
to take effect.
Menu Administration/Emulations/HPGL/Enhanced Mode
Choices On—Standard resolution for fixed- and variable-spaced fonts,
4x8 grid
Off—Enhanced resolution for variable-spaced fonts, 26x36
grid
Default Off