HP QMS 1660 - Manual (Page 256)

Updated DOC
Commands
QMS 1660 Print System Reference C-20
Set Lines Per Inch Command
Format boolean
Notes The result of various settings for these parameters
is shown in the table included in the Set Carriage
Return (Line Termination) discussion, in terms of the
equivalent code passed to the PCL line termination
command. The second setting (lfiscrlf on, criscrlf off)
is correct for most ASCII listings printed from UNIX
machines. PC listings should usually be done with
both items set to Off, and Macintosh listings usually
require the third setting (lfiscrlf Off, criscrlf On). Note
that the FF becomes a CR-FF when the LF is a CR-
LF.
Syntax %%IncludeFeature:linesperinch (#)
Purpose Sets the default PCL line spacing.
Notes Both the %%IncludeFeature:linesperinch and
%%IncludeFeature:linesperpage DOC commands affect
PCL’s default VMI (vertical motion index). In the event that both
are specified, the linesperpage DOC command is ignored.
Variable #
Purpose Specifies the default number of lines per inch.
Range 1-48
Default 6
Format Integer