The product prints slowly – HP Photosmart Premium Fax C410 User Manual
Page 132
If this did not solve the issue, try the next solution.
Solution 2: Load paper in the input tray
Solution: If the product has only a few sheets remaining, load more paper in the
input tray. If there is plenty of paper in the input tray, remove the paper, tap the stack
of paper against a flat surface, and reload the paper into the input tray.
For more information, see:
Cause: The product picked up two sheets of paper.
The product prints slowly
Try the following solutions if the product is printing very slowly.
•
Solution 1: Use a lower print quality setting
•
Solution 2: Check the ink levels
•
Solution 3: Contact HP support
Solution 1: Use a lower print quality setting
Solution: Check the print quality setting. Best and Maximum dpi provide the best
quality but are slower than Normal or Draft. Draft provides the fastest print speed.
To select a print speed or quality
1.
Make sure you have paper loaded in the input tray.
2.
On the File menu in your software application, click Print.
3.
Make sure the product is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5.
Click the Features tab.
6.
In the Paper Type drop-down list, select the type of paper that you have loaded.
7.
In the Print Quality drop-down list, select the appropriate quality setting for your
project.
NOTE:
To find out what dpi the product will print based on the paper type
and print quality settings you selected, click Resolution.
For more information, see:
Cause: The print quality was set to a high setting.
If this did not solve the issue, try the next solution.
Chapter 12
130
Solve a problem
Solve a problem