High End Systems Power Cue DMX - Manual (Page 71)

MEMORY CARD TYPE
The Power Cue DMX uses a PC card, Type 1, 512Kb, SRAM.
The card is used to perform the following functions:
· To store the contents of the Power Cue DMX’s memory, i.e. as a backup or as longterm storage.
· To update the intelligent fixtures library.
· To update the operating system.
USING THE CARD
All card functions are accessed from the main menu by
pressing
CARD.
Always ensure that the card is correctly seated in its
connector before attempting card operations.
FORMATTING THE CARD
A previously unused card will need to be formatted
before it can receive data.
Press Backup.
1. 'Create new backup card?' Press STORE/YES.
2. Note: 'DO NOT INTERRUPT CARD TRANSFER.'
3. 'Card transfer complete.' You may now press
ESCAPE/NO to return to the main menu.
COPYING DATA TO THE CARD
Press Backup.
1. 'Overwrite backup card?' Press STORE/YES.
2. Note: 'DO NOT INTERRUPT CARD TRANSFER.'
3. Press
ESCAPE/NO to return to main menu.
PCMCIA card readers are available on the market. These allow the transfer of data to
and from personal computers - a cheaper solution than multiple memory cards. If you
have difficulty in sourcing a card reader, please contact your dealer or Power Line direct.
66
TIP!