High End Systems Power Cue DMX - Manual (Page 11)

SET UP PASSCODES
You may set passcodes to protect the Prog/Edit menu, the Setup menu and the Card menu. The
code to the setup menu is the master and has global access. When your Power Cue DMX is
delivered, it is set up with the passcode 0000 and all menu levels are open. Setting up the passcode
with anything other than 0000 invokes the security system. Any security system in place may be
cancelled by re-instating the passcode 0000.
5. Select one of the three menus to protect.
You may choose a different password for
each menu.
6
Before you can use the Power Cue DMX there are several features that should be
configured via the set up menu. When you switch on the Power Cue DMX, the first screen
you see will show several options, one of which is SetUp. At other times SetUp may be
accessed by pressing Escape when the display shows RUN MODE.
1. Press SetUp
2. You must know the current passcode
protecting a menu, in order to access
the menu. (The default is 0000.)
6. Enter the CURRENT passcode for the
selected menu, using the numeric keypad,
like you did in step 3.
Since there are three menus to protect, there can be three different passcodes. Make
them unforgettable or write them down and keep them handy.
.
Neither uploading a new operating system nor erasing
everything in the system options
menu erases current passcodes. TIP!