High End Systems Power Cue DMX - Manual (Page 44)

39
•Press Prog/Edit
•Press Scene
•Select a memory
•Press Group
•Select Groups
•Select level
•Press STORE
3.Scroll to the desired scene and press
STORE. If you are editing a previously-
programmed scene, you may enter the scene
number on the alphanumeric keypad, instead
of scrolling through the scene list. Enter all
three digits, e.g. 009, not just 9.
A previously-programmed scene will have a
name. You may overwrite or edit such scenes.
Where there are several scenes with the
same name, the Power Cue DMX will give
them a number in additional to the name. For
example, if two scenes are programmed with
the name open white, the first one is referred
to as
open white and the second one as open
white [001].
4. Press Group.
7. EITHER Press STORE to save and then
name the scene as described in previous
sections.
OR Press ATTRIB, to define how the select-
ed channels within the groups(s) will function
within the scene. See the next section over
the page.