High End Systems Power Cue DMX User Manual
Page 45
Remember that an audio input connection is not absolutely necessary. The Power Cue
DMX is equipped with an internal microphone to run audio functions. It is disabled by
inserting a jack plug into the audio socket.
40
SELECTING SCENE ATTRIBUTES - GENERIC LIGHTING
1. Press Prog/Edit.
2. Press Scene.
5(a). Scroll through the options under the
Type
button. If you select
MOVING ZONE, this
screen appears and you can then adjust the
various attributes. When step is not
audio,
speed is enabled and may be adjusted using
the trackball.
Slope
is either switch or
crossfade.
Loop is either loop or one-shot.
When you push
dim the level may be adjusted
using the trackball. Bump through the various
patterns to choose the zone effect you want.
Press STORE when finished. Note that the
speed refers to the time in minutes and sec-
onds taken for one cycle of the zone
pattern.
OR
5(b). Scroll through the options under
the
Type button. If you select
SOUND-TO-
LIGHT, this screen appears. If you now go
back into the channels menu, you will notice
that the channels no longer have levels but
are tagged
bass, tenor, alto and
treble. You
can select each channel and change the
bass, tenor, alto and
treble settings using the
trackball.
TIP!