High End Systems Power Cue DMX - Manual (Page 13)

8
1. Press SetUp. Enter the SetUp passcode, if
active.
2 . Press ChnName
4. Enter or edit the channel name as shown
in step 5.
NOTE: Channels used by fixtures are
named automatically during the setup
fixtures routine. The automatically-
assigned names may not be overwritten.
If you are using fixtures, install them first.
5. Use the alpha-numeric pad to enter a new
name or edit the existing one. Press STORE
when finished.You have now looped back to
step no. 3 and can scroll to another channel or
press ESCAPE to go backwards through the
menu levels.
SET UP CHANNEL NAMES
This section discusses how to name channels, which can make them easier to remember.