High End Systems Power Cue DMX - Manual (Page 37)

32
PROGRAMMING SCENES USING PRESET FOCUS
Preset focuses or position memories allow you to speed up the programming of fixtures into
scenes by linking channels to a library of scenes that you have previously programmed for this
purpose. In the Power Cue DMX this library can contain 46 scenes of the 512 available, i.e. nos.
450-495 and in the scene list these scenes are indicated with a 'p' on the right hand side of the
display. A scene indicated with a 'P' (upper case) is a preset currently being used by a client
scene. Preset scenes are
programmed in the normal way, as shown in pages 24-29. Whenever a preset scene is modified,
all its client scenes are similarly modified. Up to three presets may be used by each client scene.
When you program a client scene and create a link to a preset scene to choose, for example, a
mirror position, the mirror channels will be annotated Lnk while all other channels will be annotat-
ed NoLnk, see 8. below.
Client scene channels linked by a previous selection are automatically excluded from any
6. Scroll to the desired preset scene and
press STORE to apply the preset to the
scene being programmed. If you attempt an
invalid link, you will see the message ** No
linkable channels**.
Note: The message ‘Scene links nnn
channels’ refers to the number of selected
fixtures multiplied by the number of
non-transparent channels in each fixture.
1. Press Prog/Edit. 2. Press Scene
5. Press Preset.