High End Systems Power Cue DMX User Manual
Page 41
REMOVING CHANNELS FROM A SCENE
During editing a channel may be removed from a scene (made transparent again) by
scrolling to it as in step 5. and then pressing ESCAPE. Do not edit the level first or the
Power Cue DMX will think you simply want to cancel the edit.
36
(B) PROGRAMMING CHANNELS INTO A SCENE - GENERIC LIGHTING
1. Press Prog/Edit
2.
Press Scene
4. Press Chans to select channels for the
scene.
Alternatively you may press Group to select
any previously-defined group(s) into the
scene. See page 30.
5. Scroll through the channel list. All channels
not previously programmed are transparent (see
page 31 for explanation) until you give them a
level by means of the trackball. Press STORE
when finished.
TIP!