HP C100/110 - Manual (Page 38)

22
System Overview
Important Information You Need to Note
A terminal window opens.
3 Move the mouse cursor into the terminal window and single-click the left mouse
button.
4 If you are using HP-UX 9.05, enter the following at the prompt:
/etc/lanscan
If you are using HP-UX 10.0, enter the following at the prompt:
/usr/sbin/lanscan
You will see a table similar to Table 4.
The LANIC ID in this example is 0800091595EE.
Table 4 Sample LANSCAN COMMAND TABLE
Hardware Station Dev Hard
ware
Net-Interface NetMgt Encapsulation
Path Address lu State NameUnit State ID Methods
2.0.2 0x0800091595EE 0 UP lan0 UP 4 ETHER IEEE8023
Terminal Control