beautypg.com

HP C100/110 User Manual

Page 145

background image

129

Changing Your Workstation’s Hardware Configuration

Installing Storage Devices

Installing a Hard Disk Drive in Position 1

Perform the following procedure to install a hard disk drive:

1

Remove the disk filler panel from the bottom location of the bezel by using a coin
or other flat, blunt, object to pry it from the front, as shown in Figure 29.

Figure 29

Removing a Disk Filler Panel

2

Reach into the storage bay and locate the power and data cables for the disk drive.

Refer to the cable routing label on the storage tray. See Figure 30.

3

Connect the cables to the drive.

4

From the front of the storage tray, line up the disk slides on the hard disk drive
with the position 1 slots in the storage tray chassis and slide it into place, as shown
in Figure 30.