HP C100/110 - Manual (Page 116)

100
Solving Problems
Common Problems and Solutions
Problems Using the Floppy Disk Drive
Table 12 describes a possible problem you may encounter using the floppy
disk drive and offers a solution.
Table 12 Problems Using the Floppy Disk Drive
Problem Solution
The floppy drive does not
respond to commands. Re-enter the commands and make sure that you have typed
them correctly.
Make sure that you specified the device file
/dev/rfloppy/c301d0s0 for commands that require a device
file name.
Make sure that the write-protect tab is set to write if you are
trying to copy data to a floppy diskette.
Follow the instructions in the section "Running the System
Verification Tests" in this chapter to verify that the floppy
drive is functioning properly.
If the problem persists, contact your system administrator or call your designated service
representative.