HP C100/110 - Manual (Page 212)

196
The Boot Console Interface
Displaying the Current Memory Configuration
Sample Output 2
The following sample shows the memory configuration table when a
memory SIMM has been improperly installed, or not installed in pairs. In
this example, there is only one SIMM installed in slot 4a. Note that now the
BAD MEMORY TABLE is displayed.
MEMORY INFORMATION
WARNING: Memory banks deallocated due to a SIMM size mismatch or a SIMM failure.
Refer to the ME command in the INFORMATION menu for error information.
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot/Sys Brd
--- ----- --- ---------- ---- ----------- ---- ------------
0x00000000 0 0 Configured 3 Configured 16MB 0a/b
1 Configured 0 Configured 16MB 2a/b
2 Configured 0 Configured 16MB 0a/b
3 Configured 3 Configured 16MB 2a/b
0x04000000 1 1 Configured 3 Configured 64MB 1a/b
3 Configured 0 Configured 64MB 1a/b
Group 0 interleaved 4 ways over 4 banks
Group 1 interleaved 2 ways over 2 banks
BAD MEMORY TABLE
SMC
SMC Status Bank Bank Status SIMM Size Slot/Sys Brd
--- ---------- ---- ------------ --------- ------------
1 Present 1 Sizing Error 0MB 4a/b
3 Present 2 Sizing Error 0MB 4a/b
Active, Installed Memory (bytes) :201326592 of Standard DRAM’s
Deallocated Pages (bytes) -
0
---------
Available Memory (bytes) :201326592
Good Memory Required by OS (bytes): 8151040
Memory
HVERSION SVERSION
-------- ---------
0x0490 0x00000900