HP A3312A - Manual (Page 138)

Appendix B. Product Specifications
132
Specifications
Electromagnetic:
Radiated: 5 V/m, 14 kHz to 1000 Mhz
Conducted: 3 Vrms, 30 kHz to 50 kHz; 1 Vrms, 50 kHz to 400 MHz
Magnetic: 47.5 Hz to 198 Hz @ 4 Gauss external field
Electrostatic Discharge: 1-10 kV operating; 1-25 kV nonoperating
Magnetic Interference, Nonop: < 5.25 mGauss @ 4.6 m; < 2 mGauss @ 0.7 ft
Magnetic Interference, Operating: < 5 mGauss p-p @ product surface
Magnetic Susceptibility: 47.5 Hz to 198 Hz @ 4 Gauss external field
Radiated Susceptibility: 3 V/m external field, 14 kHz to 1000 MHz
Conducted Susceptibility: 3 Vrms, 30 kHz to 50 kHz; 1 Vrms, 50 kHz to 400 MHz
ESD, Operating: 0 to 15 kV, air discharge
ESD, Nonop: 15 kV to 25 kV, air discharge
Heat Dissipation:
Min. Config.
1
: 66 W (225 Btu/hr; 57 kcals/hr)
Max. Config.
2
: 177 W (603 Btu/hr; 152 kcals/hr)
Airflow Space: 102 mm (4.02 in) min. front and rear
Temperature:
Operating (Disk/DDS Tape): 5° to 40° C (41° to 104° F)
Operating Gradient (Disk): 20
°
C/hr (68
°
F/hr) max
Operating Gradient (DDS Tape): 10
°
C/hr (50
°
F/hr) max
Nonop (Disk/DDS Tape): -40° to 65° C (-40° to 149° F)
Nonop (DDS Tape Media): -40° to 45° C (-40° to 113° F)
Nonop Gradient (Disk/DDS Tape): 20
°
C/hr (68
°
F/hr) max
Humidity:
Maximum Wetbulb Temperature: 26° C (79° F)
Operating Gradient: 10% RH/hr
Operating (Disk Module): 8 to 80% RH (noncondensing)
Operating (DDS Tape Module
w/Media): 20 to 80% RH (noncondensing)
Nonop (Disk Module): 5 to 90% RH (noncondensing)
Nonop (DDS Tape Module w/Media): 20 to 80% RH (noncondensing)
Altitude:
Operating: 0 to 3,048 m (0 to 10,000 ft.)
Nonop: 3,048 to 4,572 m (10,000 to 15,000 ft.)
Shock:
Operating
3
: 0.635 cm (0.25 in) tilt drop
Notes:
1. Minimum Configuration is 2 fan modules, 1 power module, no disk modules
2. Maximum Configuration is 2 fan modules, 2 power modules, eight 1-inch disk modules
3. No damage; no data loss