HP 441877-00F User Manual
Page 76
Configuration and diagnostics 76
o
Syntax: mode=[NFT | ALB | FEC | GEC | 802.3AD]
•
NAME
o
Syntax: name=[any unique name]
o
Description: Sets a unique name
•
PRIMARY
o
Syntax: primary | secondary
o
Description: Identifies the primary adapter. Supported only in BIND command
•
PROBE_BURST_SIZE
o
Syntax: probe_burst_size=nnn
o
Description: Changes number of probes to send in a retry
•
PROBE_CHECK_INTERVAL
o
Syntax: probe_check_interval=nnn
o
Description: Changes probes check interval
•
PROBE_RECHECK_INTERVAL
o
Syntax: probe_recheck_interval=nnn
o
Description: Changes probe retries check interval
•
PROBE_RETRY_COUNT
o
Syntax: probe_retry_count=nnn
o
Description: Changes probes retry count
•
PROBE_SEND_INTERVAL
o
Syntax: probe_send_interval=nnn
o
Description: Changes probes send interval, nnn counts 1/18 sec
•
PROBE_SET_DEFAULT
o
Syntax: probe_set_default
o
Description: Restores probes settings to factory settings
•
PROBES
o
Syntax: probes=[on | off]
o
Description: Enables/disables probes
•
PROBES
o
Syntax: probes=[BROADCAST|MULTICAST]
o
Description: Changes probes addressing
•
RECOMMIT
o
Syntax: recommit [team=nnn]
o
Description: Resets a certain mode. Use after hot binding to base drivers with Team=nnn
•
REMOVETEAM
o
Syntax: removeteam [team=nnn]
o
Description: Removes a team. Use after hot binding to base drivers with Team=nnn
•
REMOVEVLANID