HP 441877-00F User Manual
Page 75
Configuration and diagnostics 75
Where n = 0 or 1
0—Does not offload Rx Checksum verification to the adapter
1—Offloads Rx Checksum verification to the adapter
Default = 0
Advanced Network Services help - supported keywords
•
AGG_SELECTION
o
Syntax: AGG_SELECTION=[BANDWIDTH | COUNT]
o
Description: Sets active aggregator selection mode by bandwidth or count
•
BALANCE_INTERVAL
o
Syntax: balance_interval=nnn
o
Description: Changes Balance interval, nnn counts 1/18 sec
•
BALANCE_SET_DEFAULT
o
Syntax: balance_set_default
o
Description: Restores Balance interval to factory settings
•
COMMIT
o
Syntax: commit [team=nnn]
o
Description: Sets a certain mode. Use after binding to base drivers with Team=nnn.
•
DELAY
o
Syntax: delay=nnn
o
Description: Delays the commit in nnn seconds
•
FRAME
o
Syntax: frame=[ETHERNET_802.2 | ETHERNET_802.3 | ETHERNET_II | ETHERNET_SNAP]
•
HELP
o
Syntax: -H
o
Description: Displays Help
o
Example: CPQANS -H
•
JOIN_INDIVIDUALS
o
Syntax: join_individuals=[yes | no]
o
Description: Joins all individual links to one aggregator
•
LBN
o
Syntax: Reset LBN=nnn
o
Example: cpqans reset lbn=nnn
o
Description: Resets the logical board number (LBN) of a bound adapter. Supported only after
commit command. Default value = 0
•
MAX_TX_QUEUE
o
Syntax: max_tx_queue=nnn
o
Description: Sets the Max number of TX ECBs queued for send
•
MODE