HP 441877-00F User Manual
Page 57
Configuration and diagnostics 57
•
LBN
o
Syntax: Reset LBN=nnn
o
Example: cpqans reset lbn=nnn
o
Description: Resets the logical board number (LBN) of a bound adapter. Supported only after
commit command. Default value = 0
•
MAX_TX_QUEUE
o
Syntax: max_tx_queue=nnn
o
Description: Sets the Max number of TX ECBs queued for send
•
MODE
o
Syntax: mode=[NFT | ALB | FEC | GEC | 802.3AD]
•
NAME
o
Syntax: name=[any unique name]
o
Description: Sets a unique name
•
PRIMARY
o
Syntax: primary | secondary
o
Description: Identifies the primary adapter. Supported only in BIND command
•
PROBE_BURST_SIZE
o
Syntax: probe_burst_size=nnn
o
Description: Changes number of probes to send in a retry
•
PROBE_CHECK_INTERVAL
o
Syntax: probe_check_interval=nnn
o
Description: Changes probes check interval
•
PROBE_RECHECK_INTERVAL
o
Syntax: probe_recheck_interval=nnn
o
Description: Changes probe retries check interval
•
PROBE_RETRY_COUNT
o
Syntax: probe_retry_count=nnn
o
Description: Changes probes retry count
•
PROBE_SEND_INTERVAL
o
Syntax: probe_send_interval=nnn
o
Description: Changes probes send interval, nnn counts 1/18 sec
•
PROBE_SET_DEFAULT
o
Syntax: probe_set_default
o
Description: Restores probes settings to factory settings
•
PROBES
o
Syntax: probes=[on | off]
o
Description: Enables/disables probes
•
PROBES