HP 441877-00F - Manual (Page 31)

Configuration and diagnostics 31
The following return codes are the available upon exit of the eDiag utility. The return codes are backward
compatible with xDiag. Unused return codes are reserved for xDiag backward compatibility.
Return Code Value Description
ERR_NONE 00 No error
ERR_REG_TEST 01 Register test fails
ERR_PCICFG_TEST 02 PCI config test fails
ERR_INTR_TEST 03 Interrupt test fails
ERR_PCIE_LINK_TEST 04 PCIE link test fails
ERR_MSI_TEST 05 MSI test fails
ERR_NETLINK_TEST 07 Network link test fails
ERR_CAM_TEST 28 CAM test fails
ERR_TIMER_TEST 29 Timer test fails
ERR_NVRAM_TEST 32 NVRAM test fails
ERR_DMAE_TEST 34 DMA engine test fails
ERR_MACLB_TEST 38 MAC loopback test fails
ERR_PHYLB_TEST 39 PHY loopback test fails
ERR_EXTLB_TEST 40 External loopback test fails
ERR_LSO_TEST 41 LSO traffic test fails
ERR_STAT_TEST 42 Statistic test fails
ERR_RPC_TEST 43 RPC test fails
ERR_BAD_PASSWD 44 Invalid password
ERR_BAD_ARGS 45 Invalid command switch(es)
ERR_NO_DEV_FOUND 46 Operation(s) skipped, no device found
ERR_NOT_AUTH 47 Not authorized to perform the operation(s)
ERR_ONE_DEV_ONLY 48 Specify one device, no more, no less
ERR_MAC_REDUND 49 Redundant MAC address input methods
ERR_FMAC_BAD_FILE 50 Bad MAC address range file (not exist, bad
format)
ERR_FMAC_RUN_OUT 51 All MAC addrress have been used up in the
range file
ERR_FMAC_UPDATE 52 Fail to update the MAC address range file
ERR_PROMPT_MAC 53 Fail to input MAC address
ERR_MAC_TOO_DIFF 54 Primary and iSCSI MAC addresses are not
consecutive
ERR_SAME_MAC_ADDR 55 Primary and iSCSI MAC addresses are the
same
ERR_PRG_NVM_IMAGE 56 Fail to program NVRAM image
ERR_PRG_PRIM_MAC_ADDR 57 Fail to program primary MAC address
ERR_PRG_ISCSI_MAC_ADDR 58 Fail to program iSCSI MAC address
ERR_SEL_DEV 59 Fail to select the device for operation(s)
ERR_PRG_BC 60 Fail to program boot code