HP 441877-00F - Manual (Page 63)

Configuration and diagnostics 63
Parameter Description
-UP, -UPGRADE or -INSTALL -UP: Programs an Intel Boot Agent image into the FLASH on the
selected adapter. If this parameter is used IBAUtil will install a PXE
image into the adapter's FLASH. If -AUTO is not specified, the user
is prompted to save the existing image before upgrading.
-FLASHENABLE or -FE Enables Boot ROM. Saves
-FLASHDISABLE or -FD Disables Boot ROM.
-SAVE Saves existing Intel Boot Agent and EEPROM settings to a file. The
file is named based on the PCI Vendor and Device ID of the
adapter.
-RESTORE Restores previously saved Intel Boot Agent image. IBAUtil looks for
a file name based on the PCI Vendor and Device ID of the
adapter. If -RESTORE is used with -UPGRADE, an error is
generated.
Power Management Options
-WOLDISABLE or -WOLD Disables WOL functionality. on the selected adapter.
-WOLENABLE or -WOLE Enables WOL functionality on the selected adapter.
-LWSENABLE OR -LWSE Enables changing the legacy OS Wakeup Support Option on
10/100 adapters.
-LWSDISABLE OR -LWSD Disables changing the legacy OS Wakeup Support Option on
10/100 adapters.
PXE/RPL Configuration Options
-DEFAULTCONFIG or -DEFCFG Sets the PXE configuration of the selected adapter back to default
settings.
-SETUPENABLE or -STE Enables Setup Menu.
-SETUPDISABLE OR -STD Disables Setup Menu.
-TITLEENABLE OR -TLE Enables initial title message.
-TITLEDISABLE OR -TLD Disables initial title message.
-PROTOCOLENABLE OR -PROE Enables changing the boot protocol option.
-PROTOCOLDISABLE OR -PROD Disables changing the boot protocol option.
-ORDERENABLE OR -ORDE Enables changing the boot order option.
-ORDERDISABLE OR -ORDD Disables changing the boot order option.
-SETWAITTIME=X or -SWT=X Sets the setup delay time for the adapter to X seconds. Valid delay
times are 0, 2, 3, and 5.
-MESSAGEENABLE or -MSE Enables display of the Control-S setup message when PXE
initializes.
-MESSAGEDISABLED or -MSD Disables display of the Control-S setup message when PXE
initializes.
-PXEBOOT Sets the network boot protocol to PXE if a PXE image is present in
the adapter's flash.
DOS error codes
IBAUtil returns codes to the DOS command line when an error occurs.
• 0–Success