HP 441877-00F - Manual (Page 53)

Configuration and diagnostics 53
three times the minimum packet receive buffers. Typically one MB of RAM is required per 1000 receive
buffers.
In the autoexec.ncf file, delete the packet receive buffers parameter (RxBuffers=32) in the load
statement for this adapter. Deleting the receive buffers phrase from the load statement resets the receive
buffers parameter to the default value of 200 for this adapter. You must reboot the server for the new
configuration.
Example:
The default maximum number of receive buffers for the system is 500; the default minimum is 128. Edit
the startup.ncf file to have the following entries. The actual numbers will be a function of the number of
adapters in the system.
• set maximum packet receive buffers = 30000
• set minimum packet receive buffers = 10000
• set maximum physical receive packet size = 2048
Verifying or modifying adapter properties
When an adapter configuration is saved, the NetWare install program adds load and bind statements to
the autoexec.ncf file. By accessing this file, you can verify the parameters configured for each
adapter, modify them, or enter additional parameters.
NOTE: The Novell monitor program and the CONFIG command are also useful for verifying
driver configuration. For information on how to use these programs, refer to the utilities
reference in your Novell NetWare online documentation.
The parameters that can be defined in the load statements are described in NetWare server driver LOAD
line parameters for HP server adapters below. A valid autoexec.ncf file is shown below. One set of load
and bind commands is added for each frame type the adapter is configured to support.
Valid Autoexec.ncf file
Set Time Zone = PST8PDT
set Daylight Savings Time Offset = 1
set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00 AM)
set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00 AM)
set Default Time Server Type = SINGLE
set Bindery Context = O=LAN
# WARNING!!
file server name NOVELLSERVER51
# WARNING!!
# If you change the name of this server, you must update
# all the licenses that are assigned to this server. Using
# NWAdmin, double-click on a license object and click on
# the Certificate Assignments button. If the old name of
# this server appears, you must delete it and then add the
# new server name. Do this for all license objects.
ServerID 1C8EE2C
LOAD ODINEB.NLM
LOAD TCPIP
LOAD Q57 SLOT=2 FRAME=Ethernet_802.2 NAME=Q57_1_E82
BIND IPX Q57_1_E82 NET=FAFD3D25
LOAD Q57 SLOT=2 FRAME=Ethernet_802.3 NAME=Q57_1_E83
BIND IPX Q57_1_E83 NET=5A2D8D6D