HP 441877-00F - Manual (Page 38)

Configuration and diagnostics 38
The ccfwupg1.bat command upgrades the Boot Code and Option ROM firmware image on the following
c-Class Multifunction Gigabit Server Adapters:
• HP NC373i Multifunction Gigabit Server Adapter
• HP NC373m Multifunction Gigabit Server Adapter
The ccfwupg2.bat command upgrades the Boot Code and Option ROM firmware image on the following
c-Class Gigabit Server Adapters:
• HP NC326i PCIe Dual Port Gigabit Server Adapter
• HP NC326m PCIe Dual Port Gigabit Server Adapter
• HP NC325m PCIe Quad Port Gigabit Server Adapter
Upgrading firmware
To upgrade the boot code and Option ROM image on the adapter, complete the following:
1. Download and extract the HP SoftPaq as described in "Downloading the SoftPaq files (on page
10 )."
2. Copy all files and folders from the \apps\ccfwupg\ccfwupg1 directory or the
\apps\ccfwupg\ccfwupg2 directory to a bootable diskette or USB drive.
3. Boot to DOS using the diskette.
4. Type ccfwupg1.bat or ccfwupg2.bat and press the Enter key. A confirmation message displays when
the upgrade is complete.
HP Multifunction Gigabit Server Adapter Firmware Upgrade
Utility
The HP Multifunction Gigabit Server Adapter Firmware Upgrade Utility supports the following adapters.
• NC37xx
• NC380x
The utility runs under DOS from a bootable diskette or USB drive. To install, copy all files and folders to a
bootable diskette or USB drive. See "Downloading the SoftPaq files (on page
10 )."
Three commands are provided with the utility.
• INSISCSI, which installs or upgrades the iSCSI boot option ROM. This command upgrades the iSCSI
boot option ROM if the iSCSI boot option ROM is already installed and its version is out of date.
This command also installs the iSCSI boot option ROM to replace the PXE option ROM for NC37xT,
NC37xF, and NC380T adapters.
• INSPXE, which installs or upgrades the PXE option ROM. This command upgrades the PXE option
ROM if the PXE option ROM is already installed and its version is out of date.
This command also installs the PXE option ROM to replace the iSCSI boot option ROM for NC37xT,
NC37xF, and NC380T adapters.
• NICFWUPG, which upgrades iSCSI boot option ROM, PXE option ROM, and Boot Code. This
command upgrades the firmware components that are currently installed if they are out of date.
These commands run interactively by default. For each adapter, the current version and new version of
each firmware component is compared. If the installed version is older, you are prompted to accept the
upgrade by answering Y, or reject the upgrade with N.