Boot agent – HP 441877-00F User Manual
Page 58
Configuration and diagnostics 58
o
Syntax: probes=[BROADCAST|MULTICAST]
o
Description: Changes probes addressing
•
RECOMMIT
o
Syntax: recommit [team=nnn]
o
Description: Resets a certain mode. Use after hot binding to base drivers with Team=nnn
•
REMOVETEAM
o
Syntax: removeteam [team=nnn]
o
Description: Removes a team. Use after hot binding to base drivers with Team=nnn
•
REMOVEVLANID
o
Syntax: RemoveVlanID=nnn
o
Description: Removes the selected VLAN
•
RESET
o
Syntax: RESET LBN=nnn
o
Description: Supported only after Commit command
•
SECONDARY
o
Syntax: primary | secondary
o
Description: Identifies the secondary adapter. Supported only in BIND command.
•
SMPMODE
o
Syntax: SMPMODE=[SMP | NONSMP]
o
Description: Enables/disables SMP aware
•
STATUS
o
Syntax: status [team=nnn]
o
Description: Prints CPQANS status
•
TEAM
o
Syntax: team=nnnn
o
Description: Identifies the team. nnnn=DecimalNumber.
•
TX_ECBS_TO_USE
o
Syntax: tx_ecbs_to_use=nnn
o
Description: Sets number of TX ECBs to allocate per virtual adapter
•
VLANID
o
Syntax: VlanID=nnn
o
Description: Sets team to VLAN mode. Creates MLID edge
Boot Agent
The Intel® Boot Agent is a software product that allows your networked client computer to boot using a
program code image supplied by a remote server.
Implementation support for the Boot Agent includes:
•
Multi-protocol boot ROM code designed for remote booting from Gigabit Ethernet Adapters