Epson C82362 - Manual (Page 72)

3-22 Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
11. Click Assignments and then click Add. From the print queue
list, select the queue (created in step 3) and click OK.
12. Click Configuration in the Printer dialog box, and select
Parallel from the Printer type pull-down menu.
13. Click Communication. The Parallel Communication dialog
box appears.
14. Select LPT1 for Port; check Polled for Interrupts; and check
Manual load (Remote from Print Server) for Connection
type. Click OK.
15. Click OK in the Printer dialog box.
16. To assign the printer, double-click the Print Server object icon
(created in step 5). The Print Server dialog box appears.
17. Click Assignments and then click Add. From the printer
object list, select the printer object (created in step 9) and click
OK.
18. In the Print Server dialog box, select the assigned printer from
the printer object list, and click the Printer Number button to
set the printer number from 0 to 15. Click OK.
19. To confirm the objects you have assigned, double-click the
Print Server object icon. Click Print Layout, and check that the
print server, printer, and print queue are connected.
Now go to the section “Configuring the interface card using
EpsonNet WinAssist” on page 3-28.