Epson C82362 - Manual (Page 131)

6
Using the Interface Card with Windows 2000/NT 6-13
R4C3610 Adm/G
Rev. C
A5 size CHAP6.FM
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Configuring the interface card using EpsonNet WinAssist
You can use the interface card with the default setting of NetBEUI.
If you want to change the default setting, use EpsonNet WinAssist
or WebAssist. The default values for NetBEUI are as follows;
To configure the interface card for NetBEUI, follow the steps
below.
Note:
TCP/IP or IPX must be installed on your browser.
1. Turn on the printer with the interface card.
2. Start EpsonNet WinAssist.
Windows 2000/NT 4.0: Click Start, point to Programs,
EpsonNet WinAssist, then click EpsonNet WinAssist.
Windows NT 3.51: Double-click the EpsonNet WinAssist icon
in the EpsonNet WinAssist group.
Items Default values
NetBIOS name EPxxxxxx
Workgroup name Workgroup
Device name EPSON