Epson C82362 - Manual (Page 181)

9
The EpsonNet Configuration Utility 9-23
R4C3610 Adm/G
Rev. C
A5 size CHAP9.FM
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
❏ TCP/IP
❏ AppleTalk
Items Explanations
Get IP Address Select the method of acquiring the IP
address; Manual, RARP, BOOTP, or DHCP.
Set by PING Select ON when setting the IP address
using ping command.
IP Address Enter the IP address for the interface card
if set to Manual.
Subnet Mask Set the subnet mask.
Default Gateway Set the gateway address if needed.
SUBMIT button Update the changes.
Items Explanations
AppleTalk Enable or Disable AppleTalk.
Printer Name Enter the name of the printer attached
to the interface card (up to 32
characters).
Entity Type Displays the Entity type of the printer
attached to the interface card. If you are
using a Level 1 printer, enter the entity
type.
Zone Name Enter the AppleTalk zone.
Network Number Set Select Auto or Manual. It should usually
be set to Auto.
Network Number for
Manual Mode Enter the network number when you
select Manual for Network Number Set.
SUBMIT button Update the changes.