Epson C82362 - Manual (Page 198)

11-2 EPSON Status Monitor 2 (Windows only)
R4C3610 Adm/G
Rev. C
A5 size CHAP11.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Environment for EPSON Status Monitor 2
Protocols
The protocols that must be installed to run EPSON Status Monitor
2 vary depending on your operating system and printer type. The
following table divides printers into four categories: Local
printers; LPR printers, which use TCP/IP (generally in a
Windows NT network environment); NetWare printers, which
use Novell’s IPX/SPX protocol in a NetWare environment; and
Windows shared printers. Use the table below to determine what
protocols you need to install according to your operating system
and printer type, then see the appropriate section for your
operating system.
EPSON LPR 1
= EpsonNet Direct Print
LPR 2
= Windows NT LPR protocol
NetWare 3
= Necessary protocols already installed
Local
Printer LPR Printer
(TCP/IP) NetWare
Printer
(IPX/SPX) Windows
Shared
Printers
Windows 98 LPT EPSON LPR 1 NetWare 3 LPT
Windows 95 LPT EPSON LPR 1 NetWare 3 LPT
Windows 2000
Windows NT 4.0 LPT TCP/IP &
LPR
2
NetWare 3 LPR 2 & LPT
Windows NT
3.51 Not
available TCP/IP &
LPR
2
NetWare 3 LPR 2 & LPT