Epson C82362 - Manual (Page 49)

2
Setting the IP Address 2-21
R4C3610 Adm/G
Rev. C
A5 size CHAP2.FM
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
3. Click TCP/IP under Network on the Configuration menu to
view the TCP/IP setting screen.
Note:
The network administrator must confirm any changes made to the
IP address settings.
4. Select the "Get IP address" method from the following list:
Manual, RARP, BOOTP, or DHCP.
Note:
To use RARP, BOOTP, or DHCP, a server for each protocol is
necessary. If there is no server which corresponds to the protocol, do
not use it. See your server documentation for setting details.
5. Select ON or OFF in the Set by PING list box. Select ON to set
the IP address with arp/ping commands. Select OFF when
setting the IP address with EpsonNet WinAssist/MacAssist/
WebAssist to prevent unexpected changes of the IP address.