Epson CX7000F - Manual (Page 52)

52 Solving Problems
Solving Problems
If you have a problem with your Epson Stylus CX7000F Series all-in-one, check
the display on the control panel to diagnose the cause.
You can also check “Problems and Solutions” on page 54 for basic troubleshooting
suggestions, or double-click the User’s Guide icon on your computer desktop for
more detailed help.
See these sections:
■ “Error Messages” (below)
■ “Problems and Solutions” on page 54
■ “Where To Get Help” on page 57
Error Messages
Display message Cause and solution
Paper out -> Load paper into the
sheet feeder, then press the OK
button. Load or reload paper in the sheet feeder and
press the
x Start Color/OK button to
continue. See page 6 for details.
Paper jam -> Press the OK button.
Remove any remaining jammed
paper by hand. See page 55 for instructions on clearing the
paper jam.
[C, M, Y, B]: Ink low -> Press the OK
button to begin ink cartridge
replacement. Ink is low in one or more of the indicated
cartridges. See page 47 for replacement
instructions.
Replace [Cyan, Magenta, Yellow,
Black] ink cartridge -> Press the OK
button to begin ink cartridge
replacement. Ink is expended in one or more of the
indicated cartridges. See page 47 for
replacement instructions.
No [Cyan, Magenta, Yellow, Black]
ink cartridge -> Press the OK button
to install a new ink cartridge. An ink cartridge is not installed or is installed
incorrectly. See page 47 for replacement
instructions.