Epson CX7000F - Manual (Page 10)

10 Copying a Photo or Document
4. Press the Copy button. You see this display:
5. If you want your copies automatically reduced or
enlarged to fit the loaded paper size (Fit to Page
mode), press the
Copy button again. The display
changes to this:
6. To make multiple copies (up to 99), press the number keys on the numeric
keypad. The display shows the number you select.
Note:
To exit Copy mode, press the
y Cancel/Back button.
7. Press the paper type button to select Plain Paper . The light indicates which
type is selected.
8. Press the paper size button to select Letter .
9. To make a color copy, press the x Start Color/OK button.
To make a black and white copy, press the x Start B&W button.
Printing appears on the display and the CX7000F Series starts copying.
If you need to stop copying, press the y Cancel/Back button. Do not pull out
paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
Copying a Photo
1. Press the P On button to turn on the CX7000F
Series. You see a screen like this:
2. Place the photo on the glass as described on page 8. Be sure to close the
document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. See
page 7 for details.
4. Press the Copy button. You see this display:
5. If you want borderless photos (printed without a
white border), press the Copy button again to select
Fit to Page mode. (If you select 100% , photos are
printed with a border.) The display changes to this:
Copies:1 100%
Copies:1 FitPage
12:00 PM Y
Copies:1 100%
Copies:1 FitPage