Epson CX7000F - Manual (Page 37)

Sending a Fax 37
Sending a Fax
Before you fax, place your original photo or document on the document table
glass as described on page 8. Then send your fax by manually entering a fax
number, redialing the previous fax number, or selecting an entry from your speed
dial list.
Manually Entering or Redialing a Fax Number
1. Press the Fax button once to enter Fax mode. The
Fax button lights up and you see this display:
2. Press the keys on the numeric keypad to enter the
fax number. You can enter the numbers 0 to 9 and
the characters * and #, up to 64 digits total.
Note:
If you need to change a character to the left, press the l button to delete the
character and re-enter it. Press the r button if you need to move the cursor to the
right.
If you want to redial the last fax number you used, press the Redial/Pause
button instead of entering a fax number. The last fax number appears on the
screen.
3. To send a black and white fax, press the x Start B&W button.
To send a color fax, press the x Start Color/OK button.
You see this display during faxing:
Note:
If you need to cancel faxing at any time, press the y Cancel/Back button.
4. After your original is scanned, you see this screen:
If you do not need to fax another page, press the
2 key (for No). The CX7000F Series dials the fax
number and faxes your document.
Note:
If the fax number is busy or there is some other connection problem, you see an
error message and the CX7000F Series redials the number after one minute. Wait
for the redial, or check your connection and settings and try faxing again.
Enter Fax Number
1234567890
Scanning 001 98%
Send another pag