Epson CX7000F - Manual (Page 44)

44 Maintaining Your CX7000F Series
Maintaining Your CX7000F
Series
If you notice a decline in print quality, follow the instructions in this chapter for:
■ “Checking the Print Head Nozzles” (see below)
■ “Cleaning the Print Head” on page 45
■ “Checking the Ink Status” on page 46
■ “Replacing Ink Cartridges” on page 47
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles using the control
panel.
1. Load letter-size paper in the sheet feeder.
2. Press the P On button to turn on the Epson Stylus
CX7000F Series all-in-one, or press the y Cancel/
Back button until you see a screen like this:
3. Press the Setup button. You see this display:
4. Press the u or d button, or press the 3 key on the
numeric keypad, to display this option:
12:00 PM Y
1.Load/Eject
3.Nozzle Check