Epson CX7000F - Manual (Page 38)

38 Faxing a Photo or Document
If you need to fax another page, press the 1 key (for Yes). Open the document
cover, remove your first original, place your next original, and close the
document cover. Then press the x
Start Color/OK button to fax the next
page. Repeat this step to fax all the necessary pages.
Note:
If you’re sending a color fax, or a large document that fills up the memory area, the
CX7000F Series scans and faxes one page at a time. It then asks if you want to
send another page. The fax connection stays open until you are finished.
Speed Dialing a Fax Number
1. Press the Fax button once to enter Fax mode. The
Fax button lights up and you see this display:
2. Press the Setup button. You see this display:
3. Press the x Start Color/OK button. You see the first speed dial entry name or
number from your list displayed.
4. To fax to the first speed dial entry, press the x Start Color/OK button. Then
go to step 5.
To select a different speed dial entry, press the u or d button to display the
entry, or press the number key that corresponds to the speed dial entry
number. Press the x
Start Color/OK button, then go to step 5.
5. To send a black and white fax, press the x Start B&W button.
To send a color fax, press the x Start Color/OK button.
You see this display during faxing:
Note:
If you need to cancel faxing at any time, press the y Cancel/Back button.
6. After your original is scanned, you see this screen:
If you do not need to fax another page, press the
2 key (for No). The CX7000F Series dials the fax
number and faxes your document.
Note:
If the fax number is busy or there is some other connection problem, you see an
error message and the CX7000F Series redials the number after one minute. Wait
for the redial, or check your connection and settings and try faxing again.
Enter Fax Number
1.Select Speed D
Scanning 001 98%
Send another pag