Epson CX7000F - Manual (Page 33)

Setting Up Your Fax Features 33
To change the fax settings listed above, follow these steps:
1. Press the Fax button once to enter Fax mode. The
Fax button lights up and you see this display:
2. Press the Setup button. You see this display:
3. If you need to change the Paper Size , Automatic
Reduction , or Last Transmission Report
settings, press the u or d button, or press the 4 key
on the numeric keypad, to display this option:
4. Press the x Start Color/OK button. You see this
display:
5. Press the u or d button, or press the 3 , 4 , or 5 key on the numeric keypad, to
display one of these options:
■ 3.Paper Size
■ 4.Automatic Reduction
■ 5.Last Transmission Report
Then press the x Start Color/OK button.
6. Press the u or d button until the setting option you want is displayed, then
press the x Start Color/OK button to select it.
7. Repeat steps 5 and 6 to change any other settings. When you’re finished, press
the y Cancel/Back button to return to the 4.Scan & Print Setup menu.
8. If you need to change the Dial Mode , DRD , ECM ,
V.34 , or Rings to Answer settings, press the u or
d button, or press the 5 key on the numeric
keypad, to display this option:
9. Press the x Start Color/OK button. You see this
display:
Enter Fax Number
1.Select Speed D
4.Scan & Print S
1.Resolution
5.Communication
1.Dial Mode: Ton