Epson CX7000F - Manual (Page 19)

Printing From a Digital Camera 19
Printing From a Digital
Camera
If your camera is PictBridge- or USB DIRECT-PRINT ™ -compatible, you can
print your JPEG photos by connecting your digital camera directly to your Epson
Stylus CX7000F Series all-in-one. Your photos must be sized from 80 × 80 pixels
to 9200 × 9200 pixels.
1. Make sure your CX7000F Series is turned on, but not printing.
2. Remove any memory cards from the slots.
3. Load the type of paper you want to use (see page 6). Load enough sheets for
the number of photos you’ll be printing.
4. Press the paper type button to select Photo Paper to print borderless photos
(without a white border). Select Plain Paper if you want your photos printed
with a small white border.
5. Press the paper size button to select Letter , 4"x6" , or 5"x7" .
6. Connect the USB cable that came with
your camera to the camera and to the
USB connector on the front of your
CX7000F Series.
7. Make sure your camera is turned on. The
following appears on the display screen:
8. Select the photos you want to print with your camera. Then adjust any
necessary settings and print your photos as explained in your camera manual.
Note:
Depending on the CX7000F Series settings and your digital camera settings, some
combinations of paper type, size, and layout may not be supported. In addition,
some of your digital camera settings may not be reflected in the printed output.
Epson cannot guarantee the compatibility of any camera.
PictBridge