Epson CX7000F - Manual (Page 11)

Copying 11
6. To make multiple copies (up to 99), press the number keys on the numeric
keypad. The display shows the number you select.
Note:
To exit Copy mode, press the
y Cancel/Back button.
7. Press the paper type button to select Photo Paper .
8. Press the paper size button to select Letter , 4"× 6" , or 5"× 7" .
9. To make a color copy, press the x Start Color/OK button.
To make a black and white copy, press the x Start B&W button.
Printing appears on the display and the CX7000F Series starts copying.
If you need to stop copying, just press the y Cancel/Back button. Do not pull
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
When making a lot of copies, it is a good idea to remove the printed copies from the
output tray after every 10 sheets or so.
Making a Quick Copy
If you want to make a copy quickly and do not need high quality, you can print a
“draft” copy. The print quality is reduced, but the copy is printed faster.
1. Load plain, letter-size paper and select Plain Paper and Letter size on the
control panel.
2. Press the Copy button. If you want your copies automatically reduced or
enlarged to fit the loaded paper size, press the Copy button again to select Fit
to Page mode.
3. When you are ready to copy, press and hold the y Cancel/Back button, then
press and hold the x Start Color/OK button (to copy in color). When you
see Color Draft Mode on the display, release both buttons. Printing appears
on the display.
To make a black and white copy, press and hold the y Cancel/Back button,
then press and hold the x Start B&W button. When you see B/W Draft
Mode on the display, release both buttons. Printing appears on the display.