1 canceling self clean - 800 series, 4 starting self clean - benchmark® series, 1 canceling self clean - benchmark® series – Bosch 500 Series 30 Inch Double Speed Combination Electric Wall Oven Use and Care Manual User Manual
Page 32: 3 maintenance, 1 replacing an oven light bulb, 1 light bulb specifications
en-us
Cleaning and maintenance
32
a
The oven door locks. blinks on the display and then
remains lit until the oven has cooled down after self
clean is finished.
a
"SELF CLEAN" lights up on the display.
a
The timer starts to count down.
a
When self clean is finished, the display shows 0:00. The
oven remains locked until it has cooled down suffi-
ciently. "COOLING DOWN" is displayed.
a
When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
5.
Press Oven Clear/Off.
6.
Wipe the remaining ash from the oven with a moist
cloth.
Canceling self clean - 800 Series
1.
Press Oven Clear/Off.
a
"COOLING DOWN" is displayed.
a
The door remains locked.
a
When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
2.
Press Oven Clear/Off.
3.
Wipe the remaining ash from the oven with a moist
cloth.
Starting self clean - Benchmark® Series
Requirements
¡
All heating modes or timers are canceled.
¡
You have carried out the steps for preparing the oven
for self clean.
"Preparing self clean", Page 31
1.
For double ovens: Select the oven cavity you want to
clean.
2.
Press More Modes.
a
"Self Clean" lights up on the display.
a
The default self clean time "3:00" blinks on the timer
display.
3.
You can set a self clean time between 2 and 4 hours
and set a delayed start for running self clean. Press the
relevant soft key under the display.
Tip: Use a longer setting for a heavily soiled oven.
You can set a self clean timer for 2, 3 or 4 hours.
4.
Press Enter.
a
The oven door locks.
a
"SELF CLEAN" lights up on the display.
a
The timer starts to count down.
a
When self clean is finished, the display shows 0:00. The
oven remains locked until it has cooled down suffi-
ciently. "COOLING DOWN" is displayed.
a
When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
5.
Press Clear/Off.
6.
Wipe the remaining ash from the oven with a moist
cloth.
Canceling self clean - Benchmark® Series
1.
Press Clear/Off.
a
"COOLING DOWN" is displayed.
a
The door remains locked.
a
When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
2.
Press Clear/Off.
3.
Wipe the remaining ash from the oven with a moist
cloth.
12.3 Maintenance
Replacing an oven light bulb
When the oven light fails you can replace the light bulbs.
WARNING
Light socket is live when door is open if main power supply
is not turned off.
▶
Turn off main power supply at the service panel before
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
▶
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass can cause an injury.
Light bulb specifications
Refer to this chart for information on the light bulb you
have to use for your oven model.
Bulb description
Bulb image
25 Watt, halogen bulb,
G9 base, 120 Volts
Replacing a G9 base oven light with round glass cover
Note: The graphics are representative. Your appliance
may have different graphic appearances.
Requirements
¡
Refer to the oven light bulb chart for the oven light spec-
ification of your oven.
¡
Follow the safety instructions on replacing a light bulb.
1.
Turn off the power to the oven at the main power supply
(fuse or breaker box).
2.
Remove the oven racks.