Bosch 500 Series 30 Inch Double Speed Combination Electric Wall Oven Use and Care Manual - Manual (Page 25)

Home Connect™ en-us
25
10.1 Setting up Home Connect™
Requirements
¡ The appliance is connected to the power supply and is
switched on.
¡ You have a mobile device with a current version of the
iOS or Android operating system, e.g. a smartphone.
¡ The mobile device and the appliance are within range of
your home network's Wi-Fi signal.
1.
Download the Home Connect™ app.
2. Open the Home Connect™ app and scan the following
QR code.
3.
Follow the instructions in the Home Connect™ app.
10.2 Remote start
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
▶ Do not store any flammable materials or temperature
sensitive items inside, on top or near surface units of
the appliance.
Notes
¡ A permanent Remote start can be activated via the
Home Connect™ app. This function allows a remote
start of the available operating modes without automati-
cally deactivating Remote start.
¡ Remote start can only be activated if the Home Con-
nect™ set-up has been successfully completed.
¡ Some operating modes can only be started on the oven
itself.
Setting remote start
▶
Select Remote Start.
When you start the oven operation on the appliance, re-
mote start is automatically activated. You can therefore
make changes from your mobile device or start a new
operation.
a appears in the display.
Note: Opening the oven door after enabling Remote Start
will deactivate it in certain circumstances. If so, pressing
Remote Start will enable it again.
10.3 Home Connect™ settings
Adapt Home Connect™ to your needs.
You can find the Home Connect™ settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect™ has been
set up and whether the appliance is connected to your
home network.
Activating or deactivating Wi-Fi - 800 Series
You can use the Home Connect functions, if Wi-Fi is acti-
vated.
1.
Press Settings to cycle through available options until
"HOME CONNECT SETTINGS" is displayed.
2.
Press Enter.
3. Press Settings to cycle through available options until
"WI-FI ON" or "WI-FI OFF" is displayed.
4. Press Enter.
5.
Press 0 for turning Wi-Fi off, or 1 for turning Wi-Fi on.
a "DEACTIVATING WI-FI" or "ACTIVATING WI-FI" is dis-
played.
Disconnecting from the network - 800 Series
You can disconnect your oven from the network at any
time.
Note: If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect™.
1.
Press Settings to cycle through available options until
"HOME CONNECT SETTINGS" is displayed.
2.
Press Enter.
3.
Press Settings to cycle through the available options
until "NETWORK CONNECTED" is displayed.
4. Press Enter
a "PRESS 0 TO DISCONNECT" is displayed.
5. Press 0.
a "DELETING NETWORK" is displayed.
Connecting to app - 800 Series
If the Home Connect™ app is installed on your mobile de-
vice, you can connect it to your oven.
Requirement: The appliance is connected to the network.
1.
Press Settings to cycle through available options until
"HOME CONNECT SETTINGS" is displayed.
2.
Press Enter.
a "PRESS ENTER FOR HC" is displayed.
3.
Press Settings to cycle through available options until
"CONNECT TO HC APP" is displayed.
4.
Press Enter.
a "CONFIRM ON HC APP" is displayed.
5.
Confirm the connection on your Home Connect™ app.