Bosch 500 Series 30 Inch Double Speed Combination Electric Wall Oven Use and Care Manual - Manual (Page 24)

en-us Home Connect™
24
Description Menu item
Model
HBL5651UC
Menu item
Model
HBL5551UC
Menu item
Models
HBL5451UC
HBL5754UC
Menu item
Models
HBL5351UC
HBL5344UC
HBL57M52UC
Settings
Temperature offset S6-
Upper cavity
S7-
Lower cavity
S5-
Upper cavity
S6-
Lower cavity
S6 S5 ¡ When an offset value
is entered, the actual
oven temperature is
increased or de-
creased by this value.
This feature is useful if
food is either too
brown or too light.
¡ The allowable range of
increment is 0° to
+/-35°F (0 ° to
+/-19°C),
¡ Temperature offset
does not affect Self
Clean, Broil, Conv.
Broil, Warm or Pizza
modes
9.2 Changing the basic settings - 500 Series
1. For single ovens: Press ⁠ Clock and for 2 seconds.
For double ovens: Press Upper Oven and ⁠ Timer.
2. Press ⁠ Clock to cycle through the settings list.
3.
Press or to change the settings.
4. Press ⁠ Clock to move to the next setting option.
5.
Press ⁠ Clear to leave the basic settings menu.
9.3 Changing the basic settings - 800 and
Benchmark® Series
1.
Press Settings.
a The display becomes active.
2.
Press Settings to enter the settings menu.
3. Press Settings to cycle through the settings list.
4.
Press Enter to access the menu for a setting.
5.
Enter the desired value with the numeric keypad.
a The new value is automatically accepted as the display
reverts from edit mode back to standby mode.
6. Press Clear/Off to leave the basic settings menu.
9.4 Oven temperature offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or darker.
¡ When an offset temperature is selected, the actual oven
temperature is raised or lowered by this value.
¡ Do not use residential oven thermometers to evaluate
oven temperatures as they will fluctuate throughout
cooking.
¡ You can set a temperature offset from the factory base-
line. Each time you enter the temperature offset in the
basic settings menu, the factory baseline temperature is
restored so you can set a new offset value.
9.5 Auto convection conversion
Convection bake and convection multi-rack modes require
a 25°F reduction in temperature. Auto convection conver-
sion reduces the temperature you enter automatically.
¡ Simply enter the package or recipe temperature when
setting the mode. The control calculates the correct
temperature and it is shown in the display.
Home Connect™ 10 Home Connect™
Home Connect™ This appliance is network-capable. Connecting your appli-
ance to a mobile device lets you control its functions via
the Home Connect™ app, adjust its basic settings and
monitor its operating status.
The Home Connect™ services are not available in every
country. The availability of the Home Connect™ function
depends on the availability of Home Connect™ services in
your country. You can find information on this at:
www.home-connect.com.
The Home Connect™ app guides you through the entire
registration process. Follow the instructions in the
Home Connect™ app to implement the settings.
Tips
¡ Consult the Home Connect™ documents supplied.
¡ Follow the instructions in the Home Connect™ app as
well.
Notes
¡ Also note the safety information in this instruction man-
ual and ensure that it is also observed when operating
the appliance using the Home Connect™ app.
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the Home Connect™ app during this time.
¡ In networked standby mode, the appliance requires a
maximum of 2 W.