Bosch 500 Series 30 Inch Double Speed Combination Electric Wall Oven Use and Care Manual - Manual (Page 19)

Timer functions en-us
19
a When the set probe temperature is reached, the heating
mode turns off. An alarm tone sounds every 10 seconds
for 2 minutes.
5. Press Oven Clear/Off or remove the probe to turn off
the display.
– Always use the handle of the probe for inserting and
removing.
– The probe becomes hot during use. Always use
potholders to remove the probe.
a The display goes to standby mode.
7.8 Turning the panel lock on or off
With the panel lock you can disable all touch keys on the
control panel.
Requirement: The oven is in standby mode.
1.
Press and hold Panel Lock for 3 seconds.
2.
Press and hold Panel Lock again for 3 seconds to turn
off the panel lock.
a The display returns to standby mode.
Timer functions 8 Timer functions
Timer functions Your appliance has various time setting functions.
8.1 Kitchen timer
The kitchen timer is a countdown timer that has no affect
on oven heating.
You can set a kitchen timer value up to 99:59 hours.
Setting the kitchen timer - 500 Series
1.
Press ⁠ Timer.
a 0:00 blinks in the display.
2.
Press ⁠.
Tip: Holding the button down increases the timer value
more quickly.
3. Press ⁠ Timer.
a The timer starts to count down.
a When the kitchen timer has counted down an alarm
tone sounds for 2 minutes.
a Press ⁠ Clear to cancel the timer or to turn off the alarm
tone.
Editing the kitchen timer - 500 Series
1. Press ⁠ Timer.
a The current timer value blinks and can be edited.
2. Press to change the timer value.
3.
Press ⁠ Timer.
Setting the kitchen timer - 800 Series
1.
Press Kitchen Timer (on/off).
a 0:00 blinks in the display.
2.
Enter the desired timer value in H/MM format using the
numeric keypad.
3.
Press Enter.
a The timer starts to count down.
a When the kitchen timer has counted down an alarm
tone sounds for 2 minutes.
a Press Kitchen Timer (on/off) to cancel the timer or to
turn off the alarm tone.
Editing the kitchen timer - 800 Series
1. Press Kitchen Timer (on/off).
a The current timer value blinks and can be edited.
2. Enter the desired timer value using the numeric keypad.
3.
Press Enter.
Setting the kitchen timer - Benchmark® Series
1.
Press ⁠ Settings.
a The display shows "Set Timer"
2.
Press on the soft key under "Set Timer" ⁠.
a The display shows "Set Kitchen Timer"
3.
Press on the soft key under "Set Kitchen Timer" ⁠.
4.
Enter the desired timer value using the numeric keypad.
5.
Press Enter.
Editing the kitchen timer - Benchmark Series
1.
Press ⁠ Settings.
a The current timer value blinks and can be edited.
2.
Enter the desired timer value using the numeric keypad.
3.
Press Enter.
8.2 Oven timer
If you set an oven timer, operation of the oven stops auto-
matically once this time has elapsed.
Setting the oven timer - 800 Series
The oven timer automatically ends a heating mode after a
set period of time.
Note: The oven timer is not available for the heating
modes broil, convection broil, proof, or self clean.
1.
Set a heating mode and temperature.
2.
Press Oven Timer.
3.
Press Enter.
4. Enter the desired timer value in H/MM format using the
numeric keypad.
5. Press Enter.
a The oven timer starts to count down.
a When the oven timer reached 0:00 the cooking mode
ends and "OVEN TIMER FINISHED" is displayed.
a The oven timer alarm tone sounds every 10 seconds for
2 minutes.
Setting the oven timer - Benchmark® Series
1.
Set a heating mode and temperature.
2.
Press ⁠Settings.
a The display shows "Set Timer"
3.
Press on the soft key under "Set Timer"⁠.
a The display shows "Set Oven Timer"
4.
Press on the soft key under "Set Oven Timer"⁠.
5. Enter the desired timer value in H/MM format using the
numeric keypad.
6.
Press Enter.
a The oven timer starts to count down.
a When the oven timer reaches 0:00 the cooking mode
ends and "OVEN TIMER FINISHED" is displayed.
a The oven timer alarm tone sounds every 10 seconds for
2 minutes.