beautypg.com

2 self clean function, 1 preparing self clean, 2 starting self clean - 500 series – Bosch 500 Series 30 Inch Double Speed Combination Electric Wall Oven Use and Care Manual User Manual

Page 31: 1 canceling self clean - 500 series, 3 starting self clean - 800 series

background image

Cleaning and maintenance

 en-us

31

Part

Suitable cleaning method

Recommendations

Black stainless sur-

faces/ anti-fingerprint

surfaces

¡

Clean with a soft, dry towel.

¡

For stubborn dirt, use warm wa-

ter diluted with a non-abrasive,

mild cleansing soap.

Never use stainless steel polish.

Plastic and controls

When cool, clean with soapy wa-

ter, rinse and dry.

Probe

Wipe with soapy water.

¡

Do not submerge in water.

¡

Do not wash in the dishwasher.

Printed areas (words

and numbers)

Do not use abrasive cleaners or petroleum based solvents.

1

These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home

Appliances Corporation or its affiliated companies.

12.2 Self clean function

With pyrolytic self cleaning the oven is heated to a very

high temperature. Stubborn soil is burnt off and can be

wiped out after self clean is finished.

After the completion of a self-clean cycle, the oven will not

allow you to start another self-clean cycle for 24 hours.

For a double oven, if one cavity runs self clean, neither

cavity may operate a self clean cycle for 24 hours.

Preparing self clean

WARNING

During the elimination of soil during self-cleaning, small

amounts of carbon monoxide can be created and the fiber-

glass insulation could give off very small amounts of

formaldehyde during the first several cleaning cycles.

To minimize exposure to these substances, provide

good ventilation with an open window, or use a ventila-

tion fan or hood.

During the self clean cycle, parts of the appliance may be-

come potentially harmful to persons who lack adult knowl-

edge of appliances and adult reactions to potentially harm-

ful conditions.

Children should not be left alone or unattended in an

area where appliances are in use.

The oven heats up to a very high temperature during self

cleaning. Opening the door can result in injury.

When self-cleaning, confirm that the door locks and will

not open.

If the door does not lock, do not run Self Clean. Contact

Customer Service.

CAUTION

Remove broiler pans, pots, and other utensils and excess

spillage before self-cleaning.

Do not leave food or cooking utensils, etc., in the oven

during the pyrolytic self-cleaning mode of operation.

CAUTION

The oven vents are important for air circulation. Covering

the oven vents will cause the oven to overheat. Refer to

the appliance overview for the location of the oven vents.

→ 

Page 9

Do not obstruct oven vents.

NOTICE:

Do not clean parts or accessories with the self clean func-

tion.

1.

Remove all accessories and racks from the oven.

2.

Wipe out excessive spillage from the oven cavity.

Starting self clean - 500 Series

Requirements

¡

The oven is in standby mode, no timers are running.

¡

You have carried out the steps for preparing the oven

for self clean.

→ 

"Preparing self clean", Page 31

1.

For double ovens: Select the oven cavity you want to

clean.

2.

Turn the heating mode knob to Self Clean.

3.

For single ovens: Turn the temperature knob to Self

Clean. For double ovens, the correct temperature for

self clean is set automatically.

a

After 3 seconds the display blinks "- - : - -".

4.

Set the cleaning time. For single ovens: Press or . For

double ovens: Press or ⁠.
You can set a self clean time between 2 and 4 hours.

a

After 3 seconds the self clean cycle starts.

a

lights up on the control panel.

a

The oven door locks automatically.

a

When self clean is finished, the display shows 0:00.

5.

Wipe the remaining ash from the oven with a moist

cloth.

Canceling self clean - 500 Series

1.

Turn the heating mode knob to Off.

2.

For single ovens: Turn the temperature knob to Off.

a

The oven door remains locked until the oven has cooled

off.

Starting self clean - 800 Series

Requirements

¡

All heating modes or timers are canceled.

¡

You have carried out the steps for preparing the oven

for self clean.

→ 

"Preparing self clean", Page 31

1.

For double ovens: Select the oven cavity you want to

clean.

2.

Press Self Clean.

a

lights up on the display.

a

The default self clean time "4:00" blinks on the timer

display.

3.

You can set a self clean time between 2 and 4 hours

with the numeric keypad.
Tip: Use a longer setting for a heavily soiled oven.

4.

Press Enter.