Samsung BESPOKE 30 Inch Smart Slide-In Induction Range Owners Guide User Manual

Page 69

English 69

ouble

shoo

ting

Cooktop

Displayed

code

Possible cause

Solution

This code occurs if
communication between the
Main and Inverter PBA is
interrupted.

Power Off, and then Power On
to the setting you want again.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.

The top sensor is open when the
burner is operating.

Call for service

The top sensor is short when
the burner is operating.

The IGBT sensor is open when
the burner is operating.

The IGBT sensor is short when
the burner is operating.

This code occurs if the DC fan
motor is open or locked.

Displayed

code

Possible cause

Solution

C-22

The sub PCB sensor is open
when the oven is operating.

Press

Off

, and then restart the

oven. If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.

There is a short in the sub PCB
sensor.

C-23

The temperature probe sensor
is short when the oven is
operating.

C-30

The main PCB sensor is open
when the oven is operating.

There is a short in the main PCB
sensor.

C-31

This code occurs if the PCB
temperature rises abnormally
high.

Call for service

Bad line

This error message appears
if the power cord is installed
improperly.

If the power connection is
plugged in improperly, that
code appears on the display.
Reconnect the power
connection properly, and the
message disappears.

C-A2

This code occurs if the sub PCB
temperature rises abnormanlly
high.

Press

Off

Check the oven vent and
cooling vent. If the vent is
closed, never block the vent
by anything. After cooling the
oven, restart the oven.
If this does not solve the
problem, call for service.