Connecting the mouse cable – Epson 7700p User Manual

Page 91

Text mode
Original mode

Appendix A: Connecting to Additional Equipment

Connecting the Mouse Cable

To use the remote control as a mouse follow the steps below. If the
Macintosh has a USB port, you can use the USB mouse cable
included with the projector. If it has a round mouse port, you’ll need a
Macintosh mouse cable; see your projector dealer for help in obtaining
the correct cable.

1. Connect the round end of the USB mouse cable (or a Macintosh

mouse cable) to the projector’s

Mouse 1

port.

2. Disconnect your Macintosh’s mouse cable. Connect the other end

of the projector’s mouse cable to the mouse or USB port on your
Macintosh.

Mouse 1 port

USB mouse cable

7700.book Page 85 Wednesday, November 1, 2000 6:15 PM